Izdelki za olje in (204)

Castrol Transmax Axle EPX 80W-90 is a high-pressure gear oil of API class GL-5 for highly loaded axle drives and final drives (AP axles). Castrol Transmax Axle EPX 80W-90 can also be used in manual transmissions if the manufacturer requires an API GL-5 oil . Castrol Transmax Axle EPX 80W-90 protects against seizing and wear even under severe operating conditions. The gears remain clean and are protected from corrosion. Castrol Transmax Axle EPX 80W-90 ensures high functional reliability. Specifications API GL-5 MAN 342 M2 ZF TE-ML 05A, 12E, 16B, 17B, 19B, 21A Further information Transmax Axle EPX 80W-90 is Container size:60 Product number:2039267

Castrol Transmax Manual Transaxle 75W-90 is a modern, fully synthetic high-performance manual transmission lubricant. Advantages excellent wear protection and shiftability for optimal use in transaxle transmissions - extended transmission service life minimized switching forces under all climatic conditions special protection during cold starts due to low pumping capacity reduced temperature level and excellent transmission cleanliness with extended service life Specifications API GL-4+ VW 501 50 SAE Class according to J306 before 1998 Container size:208 Product number:2036558

Aral HighTronic J is a modern low-ash smooth-running engine oil in Aral Synth technology. Can be used for petrol and diesel engines (especially with diesel particulate filter DPF) where a product according to ACEA C2, API SN (or earlier) or Peugeot PSA Approval B71 2290 is required. The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C2 PSA Approval B71 2290 Container size:60 Product number:1508523

Aral EcoTronic F 5W-20 is a high-performance engine oil using Aral synthesis technology specifically developed for the Ford EcoBoost engines, which require an engine oil in accordance with the Ford WSS-M2C948-B specification. The product can also be used in many other modern Ford petrol engines that require engine oil of the Ford WSSM2C913-B, WSS-M2C913-C or WSS-M2C925-B specification (with the exception of Ford Ka, Focus ST and Focus RS). . The innovative additives in the Aral EcoTronic F 5W-20 offer excellent wear protection and additional potential for fuel savings. Application In addition to the applications already mentioned, Aral EcoTronic F 5W-20 can also be used in engines for which the manufacturer recommends or requires an engine oil in accordance with API SN Container size:1 Product number:1509018

Aral EcoTronic F 5W-20 is a high-performance engine oil using Aral synthesis technology specifically developed for the Ford EcoBoost engines, which require an engine oil in accordance with the Ford WSS-M2C948-B specification. The product can also be used in many other modern Ford petrol engines that require engine oil of the Ford WSSM2C913-B, WSS-M2C913-C or WSS-M2C925-B specification (with the exception of Ford Ka, Focus ST and Focus RS). . The innovative additives in the Aral EcoTronic F 5W-20 offer excellent wear protection and additional potential for fuel savings. Application In addition to the applications already mentioned, Aral EcoTronic F 5W-20 can also be used in engines Container size:4 Product number:1509017

Castrol Transmax Manual EP 80W-90 is a mineral oil-based manual transmission oil of viscosity class SAE 80W-90 for use in transmissions where the API GL-4 requirement is prescribed. Advantages -High temperature stability protects against deposits and oil thickening -High wear protection and good load-carrying capacity leads to extended service life of the transmission components Specifications API GL-4 MAN 341 Type Z2 ZF TE-ML 02B, 17A Container size:1 Product number:1877855

in BMW manual transmissions . Application Excellent overload protection for highly stressed sequential BMW Motorsport transmissions (SMG 1 and 2) in M ​​vehicles. Best shiftability in the ZF 6-speed manual transmission of the Land Rover Discovery III (LR3). Can also be used excellently in the VW Touareg manual transmission according to VW part number G 052 798. Advantages -Excellent wear protection properties protect highly stressed transmission components -Very good low-temperature flow properties ensure good shiftability at low temperatures -High shear stability offers constant viscosity-temperature behavior over the entire -Excellent thermal and oxidative stability prevents deposits and leads to longer specifications API GL-4 ZF TE-ML 11 Container size:1 Product number:1517941

EP/AW hydraulic oils (HVLP) based on mineral oil with a high viscosity index Description The oils in the Castrol Hyspin AWH-M series are hydraulic oils with a high viscosity index (VI) and are characterized by a significantly lower temperature dependence of the viscosity compared to other hydraulic oils . They are based on solvent raffinates and contain shear-stable VI improvers, oxidation and corrosion inhibitors, as well as zinc-containing wear protection additives. Application Due to the good viscosity-temperature behavior, the Castrol Hyspin AWH-M series is used particularly in outdoor hydraulic units that are exposed to greatly fluctuating operating temperatures. The hydraulic oils of the Castrol Hyspin AWH-M series are classified as follows: DIN 51502 - Hydraulic oils - HVLP ISO 6743/4 - Hydraulic oils type HV Product number:1589704 Container size:208 Product group:Hydraulic oils

High-performance gear oil in Aral synthesis technology with smooth-running properties. Multi-range character SAE 75W-90 for passenger car manual transmissions, two-wheel transmissions and transaxles as well as for commercial vehicle units (e.g. trucks, construction machinery, agricultural units) Specifications API GL-4+ VW 501 50 Container size:1 Product number:1544675

Aral HighTronic R is a modern low ash smooth-running engine oil in Aral Synth technology. It can be used in diesel engines (particularly with diesel particulate filter DPF) where a product according to ACEA C4 is required, such as in Renault cars with diesel particulate filter (DPF). The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C4 MB approval 226.51 Renault RN 0720 Container size:1 Product number:1509013

Aral SuperTurboral 5W-30 is a low-friction engine oil for use in almost all commercial vehicles that do not require a so-called "low SAPS oil". It enables significantly extended oil change intervals and offers significant fuel saving potential compared to conventional multi-grade engine oils. The excellent low-temperature properties and optimal wear protection, even under severe operating conditions, offer a wide range of applications. Advantages -Extended oil change intervals and thus reduction in operating costs -Excellent soot-carrying capacity reduces abrasive wear in the engine -Best engine cleanliness thanks to low deposits and an optimized detergent system -All-year-round savings potential with quick oiling thanks to synthetic base oils with excellent flow behavior Optimized wear protection Specifications ACEA E4, E7 Container size:20 Product number:1508775

Flavour

Aral HighTronic C is a high-performance engine oil in Aral synthesis technology specially developed for cars with diesel particulate filters that require an ACEA C1 or C2 engine oil ideally combined with Aral Low SAPS technology for maximum service life of the diesel particulate filter Low ash with fuel savings in conjunction with very high-quality base oils and additives Application - excellently suitable for vehicles from the former Ford PAG group: Jaguar and Land Rover - very suitable for French car brands: Peugeot and Citroen - meets the high requirements of Japanese car brands: Mitsubishi, Mazda, Honda, Subaru, Suzuki, Toyota and Nissan -suitable for American vehicles with European diesel engines , e.g. Jeep -can be used on commercial vehicles of Japanese design and Italian origin, e.g. IVECO -please note the respective vehicle-specific specifications Specifications ACEA C1, C2 Meets Ford WSS-M2C934-B Jaguar Land Rover engine oil specification STJLR.03.5005 Container size:60 Product number:1677987

Castrol Transmax Manual EP 80W-90 is a mineral oil-based manual transmission oil of viscosity class SAE 80W-90 for use in transmissions where the API GL-4 requirement is prescribed. Advantages -High temperature stability protects against deposits and oil thickening -High wear protection and good load-carrying capacity leads to extended service life of the transmission components Specifications API GL-4 MAN 341 Type Z2 ZF TE-ML 02B, 17A Container size:1 Product number:1877860

Aral HighTronic J is a modern low-ash smooth-running engine oil in Aral Synth technology. Can be used for petrol and diesel engines (especially with diesel particulate filter DPF) where a product according to ACEA C2, API SN (or earlier) or Peugeot PSA Approval B71 2290 is required. The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C2 PSA Approval B71 2290 Container size:4 Product number:1508999

Castrol Transmax Manual EP SAE 80W is a versatile mineral oil-based high-pressure gear oil of API class GL-4 for manual and axle gears. Application Castrol Transmax Manual EP 80W is preferably used in synchronized and unsynchronized manual transmissions as well as drive axles of cars, commercial vehicles, buses, agricultural and construction machinery subject to normal loads. When using it, the manufacturer's instructions must be observed. Specifications API GL-4 MB release 235.1 ZF TE-ML 17A Further information Transmax Manual EP 80W is registered under the following ZF number: ZF004862 Container size:20 Product number:2037981

"Description Aleppo soap 40% Very rich in bay oil. Ingredients Najel soap Aleppo soap - regular 40% Bay Laurel Oil, Water, Olive Oil, Glycerine, Sodium Chloride & Sodium Hydroxide Instructions: Suitable for daily use for skin and hair Packaging: Aleppo soap 185 grams in a wrapper. Pay attention: Najel Aleppo soap is a natural product, which is dried naturally. The actual weight may deviate slightly!"

Aral HighTronic R is a modern low ash smooth-running engine oil in Aral Synth technology. It can be used in diesel engines (particularly with diesel particulate filter DPF) where a product according to ACEA C4 is required, such as in Renault cars with diesel particulate filter (DPF). The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C4 MB approval 226.51 Renault RN 0720 Container size:60 Product number:1508527

Castrol Syntrans V FE 75W-80 is a fully synthetic SAE 75W-80 gear oil with special EP performance, excellent synchronous behavior and fuel saving potential. It is suitable for transaxle systems, manual transmissions, transfer cases and axles where a gear oil according to API GL-4 is required. Castrol recommended Castrol Syntrans V FE 75W-80 for 5- and 6-speed manual transmissions from Volkswagen, Audi, Seat and Skoda. Application -VW Group: can be used in all 5 and 6-speed manual transmissions Audi: according to part number G 052 532 VW: according to part number G 052 171 in dry dual clutch transmissions Advantages Very low shifting forces even at low temperatures Good shear stability - long lubrication reliability with Container size:1 Product number:1729124

Aral EcoTronic F 5W-20 is a high-performance engine oil using Aral synthesis technology specifically developed for the Ford EcoBoost engines, which require an engine oil in accordance with the Ford WSS-M2C948-B specification. The product can also be used in many other modern Ford petrol engines that require engine oil of the Ford WSSM2C913-B, WSS-M2C913-C or WSS-M2C925-B specification (with the exception of Ford Ka, Focus ST and Focus RS). . The innovative additives in the Aral EcoTronic F 5W-20 offer excellent wear protection and additional potential for fuel savings. Application In addition to the applications already mentioned, Aral EcoTronic F 5W-20 can also be used in engines for which the manufacturer recommends or requires an engine oil in accordance with API SN or ILSAC GF-5 or their previous specifications with Container size:60 Product number:1508548

Replacement Vitam 4243 zinc-free HLP hydraulic oil Description Aral Vitam MW 46 is a zinc-free high-performance hydraulic oil of the "HLP type" and is particularly suitable for use in hydraulic systems with hydrostatic drives in which high thermal loads occur. Advantages - complies with the requirements of DIN 51524 part 2 "hydraulic oil type HLP" and ISO 6743/4 "hydraulic oil type HM - zinc-free additive system protects against wear, corrosion, aging and foaming - excellent wear protection proven by a high value in the Brugger wear test - suitable for Used in Müller-Weingarten hydraulic presses Product number:1508200 Container size:208 Product group:Hydraulic oils

Castrol Syntrans AT 75W-90 is a fully synthetic manual transmission oil for commercial vehicles, especially for use in vehicles from the Mercedes-Benz Actros, Axor and Atego series. Advantages -Excellent thermal resistance -Very good wear protection, even under severe operating conditions -Excellently good synchronous behavior in MB commercial vehicle transmissions -Particularly resistant to aging Specifications API GL-4 MB Approval 235.11 Container size:20 Product number:1510611

Low-friction engine oil with Aral synthesis technology. Aral BlueTronic II SAE 10W-40 can be used in gasoline and diesel engines (including turbocharged engines) used in cars or light commercial vehicles. Specifications ACEA A3/B4 API SP Meets - Fiat 9.55535-D2 MB Approval 229.3 VW 5 01 01 / 505 00 Container size:60 Product number:1378

Castrol Transmax Manual Transaxle 75W-90 is a modern, fully synthetic high-performance manual transmission lubricant. Advantages excellent wear protection and shiftability for optimal use in transaxle transmissions - extended transmission service life minimized switching forces under all climatic conditions special protection during cold starts due to low pumping capacity reduced temperature level and excellent transmission cleanliness with extended service life Specifications API GL-4+ VW 501 50 SAE Class according to J306 before 1998 Container size:60 Product number:2036557

Castrol Axle EPX 90 is a high-pressure gear oil of API class GL-5 for highly loaded hypoid gears and final drives (AP axles). Castrol Axle EPX 90 protects against seizing and wear even under severe operating conditions . The gearboxes remain clean in the long term and are permanently protected against corrosion. Gearboxes lubricated with Castrol Axle EPX 90 offer a high level of functional reliability. Specifications API GL-5 MB release 235.0 ZF - TE-ML 16C, 17B, 19B, 21A Container size:20 Product number:1883038

Low-friction engine oil with Aral synthesis technology. Aral BlueTronic II SAE 10W-40 can be used in gasoline and diesel engines (including turbocharged engines) used in cars or light commercial vehicles. Specifications ACEA A3/B4 API SP Meets - Fiat 9.55535-D2 MB Approval 229.3 VW 5 01 01 / 505 00 Container size:208 Product number:1970

ARAL HighTronic M 5W-40 is a high-performance engine oil in Aral synthesis technology for demanding driving conditions in gasoline and diesel vehicles from the following vehicle manufacturers, among others: at Mercedes Benz for cars with gasoline and all diesel engines without particle filters, excellently suitable for most AMG and Brabus vehicles For petrol and diesel engines, including those from the VW Group Specifications ACEA A3/B4 API SP MB approval 229.3/ 229.5/ 226.5 VW 502 00/ 505 00 BMW Longlife-01 Porsche A40 Renault RN0700 / RN0710 Container size:208 Product number:1508526

BlueTronic II 10W-40 (09/01/2022) Engine oil with Aral synthesis technology Description Low-friction engine oil with Aral synthesis technology. Aral BlueTronic II SAE 10W-40 can be used in gasoline and diesel engines (including turbocharged engines) used in cars or light commercial vehicles. Specifications ACEA A3/B4 API SP Meets - Fiat 9.55535-D2 MB Approval 229.3 VW 5 01 01 / 505 00 Container size:20 Product number:1379

Aral HighTronic F 5W-30 is a high-performance engine oil using Aral synthesis technology specifically for Ford, Volvo, Jaguar and Land Rover cars with gasoline or diesel engines. It can also be used wherever an ACEA A1/B1 or A5/B5 specification is recommended. The unique formulation meets Ford WSS-M2C913-D, ...913C, ...913B and ...913-A requirements and is recommended for use in Ford diesel engines. Advantages -excellent aging, oxidation and wear protection -potential for fuel savings Specifications ACEA A1/B1, A5/B5 API SL/CF ILSAC GF4 Meets Ford WSS-M2C913-A, WSS-M2C913-B, WSS-M2C913-C, WSS-M2C913-D Container size:4 Product number:1604173

Aral HighTronic 5W-40 is a high-performance, low-friction engine oil using Aral synthetic technology. It can be used in many cars with petrol or diesel engines (please note manufacturer specifications). The balanced formulation also meets the high wear protection requirements according to VW 505 01 (pump-nozzle specification). The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C3 API SN/CF Meets Fiat 9.55535-S2 Meets Ford WSS-M2C917-A GMdexos2™ * MB approval 229.31/ 229.51 Porsche A40 Renault RN 0700 / RN 0710 VW 505 00/ 505 01 Container size:4 Product number:1509014